AP-3
FFP3 Vertical Fold-Flat Respirator
Product Features
- Lightweight, vertical fold flat respirator
- Flexible nose bridge
- Electrostatic filter media
- Conforms to EN 149:2001+A1:2009 FFP3 NR & EN14683:2019+AC:2019
- Inner seal around the nose area for an effective fit
- Available in two size options (AP-3 - Regular, APS-3 - Small). Ideal to fit a wide range of face shapes
- Splash Resistant
- Made in the UK
Certifications
CAT III
Further Information
The Alphasol+ is a vertical fold flat disposable respirator designed with an inner face seal to offer an excellent fit for all face shapes.
Product Specifics
| Filter Media Material | Non-Woven Textile |
|---|---|
| Headstrap Material | Latex-Free Elastane, Polyester, Textile Elastic |
| Inner Cover Material | Polypropylene |
| Nosebridge Material | Aluminium |
| Nosefoam Material | Polyethylene Foam |
| Outer Cover Material | Polypropylene |
| Series | AlphaSOL+ |
Storage Conditions
| Humidity | <70% |
|---|---|
| Maximum Temperature | 35°C |
| Minimum Temperature | -5°C |
Certifications
| CE | ✓ |
|---|---|
| Cat Level | III |
| EN 149:2001 + A1:2009 | FFP3 NR |
| EN 14683:2019 | Type IIR |
EN 149:2001
| Class | FFP3 |
|---|---|
| Disposable | ✓ |
Selected Option Specifics
| SKU | ASRAP300AD |
|---|---|
| Size | One-Size |
| Main Colour | White |
| Shelf Life | 5Years |
Ordering information
| Items per Pack | 20 |
|---|---|
| Case Quantity | 240 |
| Packs Per Case | 12 |
| Units per Pallet | 11520 |
Packaging
| Weight | 1.87g |
|---|---|
| Case height | 47cm |
| Case length | 55cm |
| Case width | 29cm |
Product Selector Guidance Chart
| Option | Assigned Protection (APF) | Oil/Water Based Particulates | Non-Toxic Dusts | Fine Toxic Dusts/Mists/Fumes | Very Fine Toxic Dusts/Mists/Fumes | Metal Fume |
|---|---|---|---|---|---|---|
| ASRAP300AD | 20 | Recommended | Alternative | Alternative | Recommended | Recommended |
Parts Dimensions
| Part | Width | Length | Height |
|---|---|---|---|
| Respirator | 125 mm | 160 mm | 10 mm |
Recommendations for Use
USER INSTRUCTIONS:
Use only in accordance with these instructions, as incorrect use could result in danger to
life or health. Fit according to instructions BEFORE entering the contaminated area.
Discard safely after use or replace with a new respirator if:
• Excessive clogging of the respirator causes breathing difficulty or discomfort
• If the respirator becomes damaged
• The respirator has been worn for 8 hours.
Do not use in oxygen deficient, (less than 19%), explosive atmospheres or confined
spaces where gases or aerosols may accumulate and the concentration of contaminant
is immediately dangerous to life or health, (over the IDLH value).
Leave the contaminated area if:
• The respirator is damaged
• You become dizzy or have difficulty breathing
• You become irritated or other distress occurs
• You become uncertain of the nature and/or concentration of contaminant.
WARNING:
• As facial hair reduces the protection offered it is recommended that these respirators
are used by clean shaven personnel only
• Do not use for protection against gases
• Single shift use only
• Do not remove whilst in contaminated area.
You may also like
4520
Disposable 3-Panel Fold Flat Respirator - FFP2
EN 149:2001 + A1:2009:FFP2 NR | EN 14683:2019:Type IIR
4530
Disposable 3-Panel Fold Flat Respirator - FFP3
EN 149:2001 + A1:2009:FFP3 NR | EN 14683:2019:Type IIR
AP-3
Enquiry for:
AP-3
FFP3 Vertical Fold-Flat Respirator