Aria Lite

Nitrile Foam Palm Glove with High Breathability and Excellent Abrasion Resistance

Product Features

Seamless nylon/spandex liner
Thin and durable nitrile foam coating on palm
Level 4 abrasion resistance
Superior comfort and dexterity
Contact heat protection up to 100°C / 212°F for a short period (15 sec max)
Anatomically engineered for maximum fit
Excellent grip in both wet and dry environments

Certifications

CAT II

EN 388:2016
+ A1:2018

4131A

EN 407:2020

X1XXXX

ANSI/ISEA 105:2016

A1 | 4 | 2

Declaration of Conformity

Datasheet

User Information Sheet

EN407-2020 Hand Protection Guide

Hand Sizing Chart

Automotive Facilities Management Highways and Infrastructure Manufacturing Oil and Gas Utilities

General Goods Handling General Maintenance Inspection and Quality Control Machinery and Plant Operation

Features

3D Moisturevap Confidence in Textiles Oil Grip Sanitized Protection Touchscreen

Further Information

Lightweight general handling glove with outstanding durability and grip properties.

Available Options

Product Code	Size	Width	Length	Height	Weight
SKG00061FB	6/XS	100 mm	240 mm	10 mm	46.5 g
SKG00061FD	7/S	100 mm	265 mm	10 mm	47 g
SKG00061FF	8/M	100 mm	265 mm	10 mm	47 g
SKG00061FH	9/L	100 mm	265 mm	10 mm	47.5 g
SKG00061FJ	10/XL	120 mm	270 mm	10 mm	48 g
SKG00061FL	11/XXL	120 mm	270 mm	10 mm	48.5 g
SKG00061FN	12/XXXL	120 mm	270 mm	10 mm	48.5 g

Product Specifics

Coating	Foam Nitrile
Coating Type	Palm Coated
Cuff Style	Elasticated Knit Wrist
Gauge	15
Liner	Nylon, Spandex
Series	Aria
Reusable	✓

Certifications

CE	✓
Cat Level	II
EN 388:2016 + A1:2018	4131A
EN 407:2020	X1XXXX
EN 21420:2020	✓
ANSI/ISEA 105:2016	A1, 4, 2

EN 388:2016 + A1:2018

Value		4131A
Abrasion Resistance		4(1-4)
Cut Resistance (Coup Test)		1(1-5)
Tearing Resistance		3(1-4)
Puncture Resistance		1(1-4)
Cut Resistance (TDM Test)		A(A-F)

EN 407:2020

Value		X1XXXX
Contact Heat Resistance		1(1-4)

ANSI/ISEA 105:2016

Value		A1, 4, 2
Cut Resistance		A1(A1-A9)
Abrasion Resistance		4(1-6)
Puncture Resistance		2(1-5)

Options

Selected Option Specifics

SKU	SKG00061FB
Size	6/XS
Main Colour	Grey
Secondary Colour	Black

SKU	SKG00061FD
Size	7/S
Main Colour	Grey
Secondary Colour	Black

SKU	SKG00061FF
Size	8/M
Main Colour	Grey
Secondary Colour	Black

SKU	SKG00061FH
Size	9/L
Main Colour	Grey
Secondary Colour	Black

SKU	SKG00061FJ
Size	10/XL
Main Colour	Grey
Secondary Colour	Black

SKU	SKG00061FL
Size	11/XXL
Main Colour	Grey
Secondary Colour	Black

SKU	SKG00061FN
Size	12/XXXL
Main Colour	Grey
Secondary Colour	Black

Ordering information

Items per Pack	10
Case Quantity	120
Packs Per Case	12

Packaging

Unit Height	10mm
Unit Length	240mm
Unit Width	100mm
Pack height	19cm
Pack length	24cm
Pack width	10cm
Weight	46.5g
Pack weight	0.41kg
Case height	23cm
Case length	53cm
Case width	32cm
Case weight	5.5kg

Disposal

When stored as recommended, the gloves will not suffer a change in mechanical properties for up to three years from the date of manufacture. Service life cannot be specified and depends on the application and it is the responsibility of user to ascertain suitability of the glove for its intended use.

Cleaning

Check that the glove does not present holes, cracks, tears, colour change…., and discard any glove presenting such defects. Gloves should not be left in contaminated condition if reuse is intended in which case gloves should be cleaned as far as possible. To clean, wipe with a damp cloth.

Lifetime

Service life depends on the glove application and therefore cannot be specified. It is the responsibility of the user to ensure the glove is suitable for its intended use.

Notes

CAUTION! Avoid using near moving machinery due to entanglement hazard. PLEASE NOTE The results of the physical tests should help in glove selection, however it must be understood that actual conditions of use cannot be simulated and it is the responsibility of the end user and not the manufacturer to determine glove suitability for the intended use.

Storage

Ideally stored in dry conditions between 10°C and 30°C in the original packaging and sheltered from direct light. Do not exceed 40°C. If the materials constituting the gloves are known to lose their performances during recommended storage please ensure that the storage will not change the glove characteristics significantly.

Recommendations for Use

Gloves are designed to protect against intermediate risk which may include General material handling, assembly and maintenance glove providing protection against slip, dirt and moderate mechanical workload. Suitability of the product is to be ascertained per each particular work application as part of the end users risk assessment program. Use protective gloves only for the intended use and the right size. Check for damage before use, Never use damage glove.