Eco Bronze

When stored as recommended, the gloves will not suffer a change in mechanical properties for up to three years from the date of manufacture. Service life cannot be specified and depends on the application and it is the responsibility of user to ascertain suitability of the glove for its intended use.

Check that the glove does not present holes, cracks, tears, colour change…., and discard any glove presenting such defects. Gloves should not be left in contaminated condition if reuse is intended in which case gloves should be cleaned as far as possible. To clean, wipe with a damp cloth.

Service life depends on the glove application and therefore cannot be specified. It is the responsibility of the user to ensure the glove is suitable for its intended use.

CAUTION! Avoid using near moving machinery due to entanglement hazard. PLEASE NOTE The results of the physical tests should help in glove selection, however it must be understood that actual conditions of use cannot be simulated and it is the responsibility of the end user and not the manufacturer to determine glove suitability for the intended use. To request our other available language versions of this information sheet, or for further information on this product please contact our sales team on [email protected] or refer to our website www.globusgroup.com. To access and download Declaration of Conformity please visit gg-doc.com/skytec.

Ideally stored in dry conditions between 10°C and 30°C in the original packaging and sheltered from direct light. Do not exceed 40°C. If the materials constituting the gloves are known to lose their performances during recommended storage please ensure that the storage will not change the glove characteristics significantly.