EMG258

Multi Purpose Polyester Double Dipped Nitrile Palm Coated

Product Features

A flexible, robust glove with polyester liner
With its dual palm coating (flat nitrile + sandy nitrile), It protects the palm area from water, oils, hydrocarbons, grease and abrasion, with optimal long lasting grip
Contact heat protection up to 100°C / 212°F for a short period (15 sec max)
Close-fitting liner for a comfortable wearing experience
Designed for easy movement and continuous wear
Elasticated wrist provides a secure and comfortable fit
Seamless liner prevents irritation

Certifications

CAT II

EN 388:2016
+ A1:2018

4121A

EN 407:2020

X1XXXX

ANSI/ISEA 105:2016

A1 | 6 | 2

Declaration of Conformity

Datasheet

User Information Sheet

EN407-2020 Hand Protection Guide

Hand Sizing Chart

Aerospace Automotive Construction Manufacturing Oil and Gas

General Goods Handling Handling Wet Oily or Greasy Materials

Features

Dual Coating Technology Oil Grip

Further Information

Double dipped palm coated nitrile with a nitrile sandy finish palm. Excellent grip in wet and oily conditions as well as oil and water submersion.

Available Options

Product Code	Size	Width	Length	Height	Weight
EMG00258HB	6/XS	90 mm	220 mm	20 mm	37 g
EMG00258HD	7/S	100 mm	220 mm	20 mm	45 g
EMG00258HF	8/M	90 mm	240 mm	15 mm	46 g
EMG00258HH	9/L	110 mm	250 mm	20 mm	51 g
EMG00258HJ	10/XL	120 mm	260 mm	20 mm	54 g
EMG00258HL	11/XXL	130 mm	270 mm	20 mm	58 g
EMG00258HN	12/XXXL	140 mm	280 mm	20 mm	63 g

Product Specifics

Coating	Foam, Nitrile, Sandy Nitrile
Coating Type	Palm Coated
Cuff Style	Elasticated Knit Wrist
Gauge	13
Liner	Polyester
Series	TRC
Reusable	✓

Certifications

CE	✓
Cat Level	II
EN 388:2016 + A1:2018	4121A
EN 407:2020	X1XXXX
ANSI/ISEA 105:2016	A1, 6, 2

EN 388:2016 + A1:2018

Value		4121A
Abrasion Resistance		4(1-4)
Cut Resistance (Coup Test)		1(1-5)
Tearing Resistance		2(1-4)
Puncture Resistance		1(1-4)
Cut Resistance (TDM Test)		A(A-F)

EN 407:2020

Value		X1XXXX
Contact Heat Resistance		1(1-4)

ANSI/ISEA 105:2016

Value		A1, 6, 2
Cut Resistance		A1(A1-A9)
Abrasion Resistance		6(1-6)
Puncture Resistance		2(1-5)

Options

Selected Option Specifics

SKU	EMG00258HB
Size	6/XS
Main Colour	Red
Secondary Colour	Black

SKU	EMG00258HD
Size	7/S
Main Colour	Red
Secondary Colour	Black

SKU	EMG00258HF
Size	8/M
Main Colour	Red
Secondary Colour	Black

SKU	EMG00258HH
Size	9/L
Main Colour	Red
Secondary Colour	Black

SKU	EMG00258HJ
Size	10/XL
Main Colour	Red
Secondary Colour	Black

SKU	EMG00258HL
Size	11/XXL
Main Colour	Red
Secondary Colour	Black

SKU	EMG00258HN
Size	12/XXXL
Main Colour	Red
Secondary Colour	Black

Ordering information

Items per Pack	10
Case Quantity	120
Packs Per Case	12

Packaging

Unit Height	20mm
Unit Length	220mm
Unit Width	90mm
Pack height	13cm
Pack length	22cm
Pack width	9cm
Weight	37g
Pack weight	0.38kg
Case height	56cm
Case length	23cm
Case width	26cm
Case weight	4.44kg

Unit Height	15mm
Unit Length	240mm
Unit Width	90mm
Pack height	15cm
Pack length	24cm
Pack width	9cm
Weight	46g
Pack weight	0.46kg
Case height	56cm
Case length	23cm
Case width	26cm
Case weight	5.52kg

Disposal

When stored as recommended, the gloves will not suffer a change in mechanical properties for up to three years from the date of manufacture. Service life cannot be specified and depends on the application and it is the responsibility of user to ascertain suitability of the glove for its intended use.

Cleaning

Check that the glove does not present holes, cracks, tears, colour change…., and discard any glove presenting such defects. Gloves should not be left in contaminated condition if reuse is intended in which case gloves should be cleaned as far as possible. To clean, wipe with a damp cloth.

Lifetime

Service life depends on the glove application and therefore cannot be specified. It is the responsibility of user to ensure the glove is suitable for its intended use.

Notes

CAUTION! Avoid using near moving machinery due to entanglement hazard. PLEASE NOTE The results of the physical tests should help in glove selection, however it must be understood that actual conditions of use cannot be simulated and it is the responsibility of the end user and not the manufacturer to determine glove suitability for the intended use.

Storage

Ideally stored in dry conditions between 10°C and 30°C in the original packaging and sheltered from direct light. Do not exceed 40°C. If the materials constituting the gloves are known to lose their performances during recommended storage please ensure that the storage will not change the glove characteristics significantly.

Recommendations for Use

Gloves are designed to protect against intermediate risk which may include General material handling, assembly and maintenance glove providing protection against slip, dirt and moderate mechanical workload. Suitability of the product is to be ascertained per each particular work application as part of the end users risk assessment program. Use protective gloves only for the intended use and the right size. Check for damage before use, Never use damage glove.