Torq Derrick

CLEARANCE

Cotton Impact Glove, with Cut Resistance


Product Features

  • Classic corded cotton palm absorbs oil to give you a grip in greasy situations
  • Dense, moulded TPR protection zones on knuckles, fingers, thumb and back of hand
  • Ergonomically curved fingers to reduce hand fatigue
  • Dual layered thumb crotch/saddle for additional durability
  • Adjustable cuff for a custom fit
  • Contact Heat Resistant up to 250°C/482°F

Certifications

CE
CAT II
EN 388:2016 + A1:2018
EN 388:2016
+ A1:2018
1241BP
EN 407:2004
EN 407:2004
X2XXXX
EN 407:2020
EN 407:2020
X2XXXX
ANSI
A2 3 2
ANSI/ISEA 105:2016
A2 | 3 | 2
ANSI 138 Level 2
IMPACT
Level 2
EN 388:2016
EN 388:2016
1241BP




Further Information

A cotton glove featuring protection from impacts & cuts. Developed for the oil industry after a decade of consultation, this glove gives wearers a secure grip in oily conditions and the necessary protection to work safely on site.

Available Options

Product Code Size Width Length Height Weight
SKG00025CF 8/M 104 mm 225 mm 28 mm 200 g
SKG00025CH 9/L 110 mm 235 mm 28 mm 200 g
SKG00025CJ 10/XL 116 mm 245 mm 28 mm 210 g
SKG00025CL 11/XXL 122 mm 250 mm 28 mm 220 g

Product Specifics

CoatingThermoplastic Rubber (TPR)
Cuff StyleHook and loop
LinerPolyester, Spandex, TPR
Material-
SeriesTorq™
Reusable

Certifications

CE
Cat LevelII
EN 388:2016 + A1:20181241BP
EN 407:2004X2XXXX
EN 407:2020X2XXXX
EN 420:2003 + A1:2009
ANSI/ISEA 105:2016A2, 3, 2
ANSI 138:2019Level 2
EN 388:20161241BP

EN 388:2016 + A1:2018

Value1241BP
Abrasion Resistance
1(1-4)
Cut Resistance (Coup Test)
2(1-5)
Tearing Resistance
4(1-4)
Puncture Resistance
1(1-4)
Cut Resistance (TDM Test)
B(A-F)

EN 407:2004

ValueX2XXXX
Contact Heat Resistance
2(1-4)

EN 407:2020

ValueX2XXXX
Contact Heat Resistance
2(1-4)

ANSI/ISEA 105:2016

ValueA2, 3, 2
Cut Resistance
A2(A1-A9)
Abrasion Resistance
3(1-6)
Puncture Resistance
2(1-5)

ANSI/ISEA 138:2019

ValueLevel 2
Impact Protection
2(1-3)

EN 388:2016

Value1241BP
Abrasion Resistance
1(1-4)
Cut Resistance (Coup Test)
2(1-5)
Tearing Resistance
4(1-4)
Puncture Resistance
1(1-4)
Cut Resistance (TDM Test)
B(A-F)

Options

Selected Option Specifics

SKUSKG00025CF
Size8/M
Main ColourWhite
Secondary ColourOrange
SKUSKG00025CH
Size9/L
Main ColourWhite
Secondary ColourOrange
SKUSKG00025CJ
Size10/XL
Main ColourWhite
Secondary ColourOrange
SKUSKG00025CL
Size11/XXL
Main ColourWhite
Secondary ColourOrange

Ordering information

Items per Pack10
Case Quantity60
Packs Per Case6
Items per Pack10
Case Quantity60
Packs Per Case6
Items per Pack10
Case Quantity60
Packs Per Case6
Items per Pack10
Case Quantity60
Packs Per Case6

Packaging

Unit Height28mm
Unit Length225mm
Unit Width104mm
Weight200g
Case height28cm
Case length49.5cm
Case width35.6cm
Case weight13kg
Unit Height28mm
Unit Length235mm
Unit Width110mm
Weight200g
Case height28cm
Case length49.5cm
Case width35.6cm
Case weight13.5kg
Unit Height28mm
Unit Length245mm
Unit Width116mm
Weight210g
Case height28cm
Case length52cm
Case width38.1cm
Case weight14kg
Unit Height28mm
Unit Length250mm
Unit Width122mm
Weight220g
Case height28cm
Case length52cm
Case width38.1cm
Case weight14.5kg
Cleaning
To clean, wipe with a damp cloth. Note: the performance characteristics of worn and laundered gloves may differ from the results shown. Inspect the gloves to ensure no damage is present.
Lifetime
Service life depends on the glove application and therefore cannot be specified. It is the responsibility of the user to ensure the glove is suitable for its intended use.
Storage
Store in dry conditions in the original packaging and away from direct sunlight
Recommendations for Use
General handling glove with cut and impact protection. Not suitable for high contact heat (beyond 250°C /482°F), electrical, chemical protection. Do not use near moving machines if there is a risk of entanglement.
Recommendations for Use
General handling glove with cut and impact protection. Not suitable for high contact heat (beyond 250°C /482°F), electrical, chemical protection. Do not use near moving machines if there is a risk of entanglement.
Recommendations for Use
General handling glove with cut and impact protection. Not suitable for high contact heat (beyond 250°C /482°F), electrical, chemical protection. Do not use near moving machines if there is a risk of entanglement.
Recommendations for Use
General handling glove with cut and impact protection. Not suitable for high contact heat (beyond 250°C /482°F), electrical, chemical protection. Do not use near moving machines if there is a risk of entanglement.

You may also like

T5 PU Glove
CLEARANCE

T5 PU

Flexible PU Palm and High Level Cut Resistance
EN 388:2016 + A1:2018:4X43B | EN 388:2016:4X43B
View Product
Skytec Elements EMG245 Reusable Gloves
NEW

EMG245

Multi-Purpose Nylon Spandex Nitrile Foam Palm Coated Glove
EN 388:2016 + A1:2018:4121A | EN 407:2020:X1XXXX | EN 21420:2020
View Product
Temres 282 Thermal Glove

282 Temres

Breathable and Waterproof Insulated PU Glove
EN 388:2016 + A1:2018:4221X | EN 511:0 2 1 | EN 388:2016:4221X
View Product
317 Glove

317

High Visibility Latex Grip Glove For Intense Manual Handling
EN 388:2016 + A1:2018:2142X | EN 21420:2020 | EN 388:2016:2142X
View Product
Torq Derrick
Torq Derrick Glove

Enquiry for: Torq Derrick

🇬🇧
Compare 0
View Comparison